Mould Spring

Mould Spring 1.JIS and ISO standard 2.Good toughness 3.SUP-10 Material from Japan 4.Diameter:6-70mm

Mould Spring

  Custom mould spring Production and Manufacturing 

1.Our engineers are eager to help provide the most dependable mould spring for your applications.  xin yue mould company is a mould spring manufacturer  that you can depend on to deliver high quality mould spring with speedy lead times

2.Specialiaze in mould spring .your inquiries will get prompt reponse within 24 hours.

3.Free design all kind of non-standard mould spring as you requested.

4.Specification: 6X10mm ---70X500mm .

5.Paint:environmental protection electrophore

  

 Tolerance limits of mould spring 

 

Outer	Inner	free length	free length	load	curl direction
+0mm	+0.7mm	under  50mm	above 50 mm	±10%	right
-0.7mm	+0.1mm	±0.5mm	±1mm	±10%	right

 

Our advantage for mould spring:

*<.we focus on mould spring.

*<.Paint:environmental protection electrophoresis

*<.The standard specifications for mould spring is 6×10mm-- 70×500mm .

*<.Specialiaze in precision mould spring .your inquiries will get highly attention and prompt reponse

*<.Free design all kind of non-standard mould spring as you requested.

*<.We have Own the advanced production machine,having reliable quality and functionality; adequate inventory .

*<.Adopting the advanced environmental protection electrophoresis technology.

*<.Best-after service

*<.Transportation: DHL ,UPS ,TNT,EMS,FEDEX and etc

Mould Spring:Use of attention for mould spring

Choose right mould spring or will distortion and reduce service life.

 

Can’t have gap between upper plate and mould spring or will distortion and rupture.

 

When free length of moudl spring is 4 times to outer diameter ,please use guide rod shield to protect service life.

 

Can't use it for anything except compression .

 

Please use it on the mould.

 

When the lower plate parallelism is not well, high stress will happen and cause transformation and rupture .

 

It must be have some preloading when put mould spring on the mould . preventing mould Bear impact load and cause fatigue damage.

 

Install and valid service condition

 

>When Coil Spring install the hole of bottom without leader ,the deep of hole must be more than two rings than mould springs.

 

>when mould spring install with leader ,length of leader must be higher than length of mould spring

 

>.Close state (stroke limit) is reference dimension ,Pls do not use if more than 300000 times or it will be bending and failure.

 

>When installing, preloading is one over ten or more of the compression. When cope plate use with gap .will cause mould spring bending or scrap.

 

Service condition:

 

1.Allowed temperature range for mould spring

 

TF.TL.TM.TH.TB.TR.TY : 80°C--30°C

 

Higher than these temperature ,you should customize.

 

In practice,when temperature higher than above. Mould spring will be scrap ,bending and etc. or use based on technicist’s guide . 

 

2.Don’t use mould spring on high temperature and wet ,or mould spring will be scrap ,bending and rustiness.

 

  

 ISO Certificate and CE Certificate for mould spring:

 

  Thank you very much for your time !

Mould Spring